Catalog > CAN-CTRL - CAN 2.0 & CAN FD Bus Controller
The CAn-CTRLimplements a CAN protocol bus controller that performs serial communication according to the CAN 2.0A, 2.0B, and the Bosch CAN FD Flexible Data-Rate specifications.
The CAN protocol uses a multi-master bus configuration for the transfer of frames between nodes of the network and manages error handling with no burden on the host processor. The core enables the user to set up economic and reliable links between various components. It appears as a memory-mapped I/O device to the host processor, which accesses the CAN core to control the transmission or reception of frames.
The CAN core is easy to use and integrate, featuring programmable interrupts, data and baud rates; a configurable number of independently programmable acceptance filters. ; and a generic processor interface or optionally an AMBA APB, or AHB-Lite interface. It implements a flexible buffering scheme, allowing fine-tuning of the core size to satisfy the requirements of each specific application.
The number of receive buffers is synthesis-time configurable. Two types of transmit buffers are implemented: a high-priority primary transmit buffer (PTB) and a lower-priority secondary transmit buffer (STB). The PTB can store one message, while the number of included buffer slots for the STB is synthesis-time configurable 0 to 16 slots. An optional wrapper instantiating multiple CAN controller cores easies integration in cases where multiple bus-nodes need to be controlled by the same host processor.
The core implements functionality similar to the Philips SJA1000 working with its PeliCAN mode extensions, providing error analysis, diagnosis, system maintenance and optimization features.
No product collateral available for this catalog entry.
No videos available for this catalog entry.
Language: Verilog • VHDL
Format: Netlist • RTL • Source
Encryption Support: Altera • Xilinx • Cadence
Maturity Level: Silicon Proven
Additional Deliverables: Documentation • Drivers • Test Bench • Test Cases